aboutsummaryrefslogtreecommitdiff
path: root/README.md
AgeCommit message (Collapse)AuthorFilesLines
2016-05-10Readme fix1.1.1Kevin Robertson1-1/+0
Removed Get-InveighStat reference
2016-05-10Code cleanup and new parametersKevin Robertson1-5/+8
Contains a few rounds of code cleanup and the following changes: Parameters Added to Invoke-Inveigh: ConsoleUnique - Enable/Disable displaying challenge/response hashes for only unique IP, domain/hostname, and username combinations when real time console output is enabled. FileUnique - Enable/Disable outputting challenge/response hashes for only unique IP, domain/hostname, and username combinations when real time file output is enabled. ConsoleStatus - Set interval in minutes for displaying all unique captured hashes and credentials. This is useful for displaying full capture lists when running through a shell that does not have access to the support functions. WPADEmptyFile - Enable/Disable serving a proxyless, all direct, wpad.dat file for wpad.dat requests. Enabling this setting can reduce the amount of redundant wpad.dat requests. This parameter is ignored when using WPADIP, WPADPort, or WPADResponse. Fixed: Corrected an issue that was preventing the MachineAccounts parameter from being fully enabled in all three scripts. Removed Support Functions: Get-InveighStat Get-InveighNTLM
2016-03-30Comment/notes update, minor cleanupKevin Robertson1-12/+9
Updated some comments and notes. Replaced ForEach alias with ForEach-Object.
2016-03-16Readme updateKevin Robertson1-1/+4
Added NBNS brute force note and fixed typo
2016-03-16Readme fixKevin Robertson1-1/+1
Second attempt at getting the Invoke-InveighBruteForce example right:)
2016-03-16Readme fixKevin Robertson1-2/+2
The Invoke-InveighBruteForce example listed the wrong function
2016-03-15New Script - Inveigh-BruteForce1.1Kevin Robertson1-72/+210
New Script - Inveigh-BruteForce - Remote (Hot Potato method)/unprivileged NBNS brute force spoofer. Inveigh-BruteForce Features: Targeted IPv4 NBNS brute force spoofer with granular control NTLMv1/NTLMv2 challenge/response capture over HTTP Granular control of console and file output Run time control Inveigh New Parameters: HTTPSCertAppID - Specify a valid application GUID for use with the ceriticate. LLMNRTTL - Specify a custom LLMNR TTL in seconds for the response packet. NBNSTTL - Specify a custom NBNS TTL in seconds for the response packet. WPADDirectHosts - Comma separated list of hosts to list as direct in the wpad.dat file. Listed hosts will not be routed through the defined proxy. Inveigh-Relay New Parameters: HTTPSCertAppID - Specify a valid application GUID for use with the ceriticate. RunTime - Set the run time duration in minutes. Bug Fix: Fixed an SMB relay issue that was causing a hang before sending the NTLMv2 response. Thanks to @mubix for reporting the bug and providing a packet capture.
2016-01-19Added p0wnedShell linkKevin Robertson1-1/+1
Added p0wnedShell link to the included in section. Removed the SMB relay note to sync with Inveigh.ps1 notes.
2016-01-12Spoofer, HTTP/HTTPS, and WPAD additions/changes1.0.0Kevin Robertson1-2/+12
LLMNR/NBNS spoofer: SpooferIPsReply/SpooferIPsIgnore - These parameters provide granular control over what systems to respond to when spoofing. SpooferHostsReply/SpooferHostsIgnore - These parameters provide granular control over what requested hostnames to respond to when spoofing. Note that SpooferHostsAccept replaces SpoofList. SpooferRepeat - This parameter replaces Repeat in order to sync the parameter name with the prefix used for other spoofer parameters. HTTP/HTTPS Listener: HTTPAuth - This parameter provides the ability to set the HTTP/HTTPS non-WPAD auth to NTLM, Basic, or Anonymous. Basic authentication can be used to capture cleartext credentials (thanks @xorrior!). HTTPBasicRealm - Set a realm name if Basic auth is enabled. HTTPDir/HTTPDefaultFile/HTTPDefaultEXE/HTTPResponse - These parameters provide control over the content served by the listener. HTTPSCertThumbprint - This parameter provides the ability to more easily set the thumbprint for custom certs. HTTP/HTTPS requests are now reported and/or logged. WPAD: WPADIP/WPADPort - These parameters provide the ability to configure a proxy server on victim systems through WPAD. WPADResponse - These parameters provide the ability to configure a custom wpad.dat response rather than the basic one used by WPADIP and WPADPort. WPADAuth - This parameter provides the ability to set the HTTP/HTTPS WPAD auth to NTLM, Basic, or Anonymous. Basic authentication can be used to capture cleartext credentials (thanks @xorrior!). Note that this parameter replaces ForceWPADAuth. Miscellaneous: Get-InveighCleartext - Gets all captured cleartext credentials. Inspect - This switch parameter serves as an easier way to inspect LLMNR/NBNS traffic. If -Inspect is added to the command line, LLMNR, NBNS, HTTP, HTTPS, and SMB are disabled.
2015-10-11Moved SMB relay code to a dedicated script, also added a Scripts directory ↵Kevin Robertson1-10/+15
and psm1 and psd1 files The SMB relay code is now in Inveigh-Relay.ps1. The script can be used either through Invoke-Inveigh or as a standalone function.
2015-10-11Revert "Moved SMB relay code to a dedicated script, also added psm1 and psd1 ↵Kevin Robertson1-15/+6
files." This reverts commit 8ab002602f672dddb91e27ff6bb7d5050771c688.
2015-10-11Moved SMB relay code to a dedicated script, also added psm1 and psd1 files.Kevin Robertson1-6/+15
The SMB relay code is now in Inveigh-Relay.ps1. The script can be used either through Invoke-Inveigh or as a standalone function.
2015-10-07Typo fixKevin Robertson1-1/+1
2015-10-07Updated Metasploit screenshot and removed Hide-InveighKevin Robertson1-3/+2
2015-10-06Updated to reflect new module formatKevin Robertson1-7/+5
2015-10-06Updated to reflect new module formatKevin Robertson1-8/+45
2015-09-20Removed invalid note regarding output locationKevin Robertson1-3/+2
2015-09-20Added new screenshots and SMB relay command lineKevin Robertson1-1/+1
2015-09-20Added new screenshots and SMB relay command lineKevin Robertson1-1/+1
2015-09-20Added new screenshots and smb relay command lineKevin Robertson1-2/+8
2015-09-13Added SMB relay noteKevin Robertson1-0/+1
2015-08-05Added parameter for controlling output directory. Added first version of ↵Kevin Robertson1-5/+5
loader script for easier execution as a payload. Added '-OutputDir' parameter for controlling the output directory. Added 'Inveigh-Loader.ps1' script which has additional options for running Inveigh as an unattended payload. Performed some cleanup. Updated screenshot in readme.
2015-08-05Added requirements sectionKevin Robertson1-0/+3
2015-08-01Added new parameterKevin Robertson1-2/+2
2015-07-12Added HTTPS optionKevin Robertson1-1/+1
2015-07-11Added test for new optionsKevin Robertson1-4/+3
2015-04-19Update README.mdKevin Robertson1-2/+2
2015-04-19Update README.mdKevin Robertson1-9/+12
2015-04-18Update README.mdKevin Robertson1-1/+1
2015-04-18Update README.mdKevin Robertson1-1/+1
2015-04-18Update README.mdKevin Robertson1-0/+3
2015-04-18Update README.mdKevin Robertson1-1/+1
2015-04-18Update README.mdKevin Robertson1-1/+1
2015-04-18Update README.mdKevin Robertson1-1/+1
2015-04-18Update README.mdKevin Robertson1-1/+19
2015-04-18Create README.mdKevin Robertson1-0/+3
generated by cgit v1.2.3 (git 2.39.1) at 2025-05-30 17:18:17 +0000